TYPICAL PHYSICAL PROPERTIES
TYPE |
AVG. PARTICLE SIZE FSSS (microns) |
APPARENT DENSITY(g/in3) |
STANDARD SCREENING |
C40 |
10.00-19.99 |
60 - 100 |
-100 Mesh |
C60 |
20.00-39.99 |
70 - 120 |
-60 Mesh |
C80 |
>40.00 |
90 - 130 |
-60 Mesh |
|
TYPICAL TRACE ELEMENT CHEMICAL ANALYSIS
METALLIC IMPURITIES (WT%) |
Element |
Max |
Typical |
Element |
Max |
Typical |
Al |
0.003 |
<0.001 |
Mo |
0.020 |
0.005 |
Co |
0.005 |
<0.001 |
Na |
0.010 |
0.005 |
Cr |
0.020 |
0.005 |
Ni |
0.020 |
0.005 |
Cu |
0.005 |
<0.001 |
Si |
0.002 |
<0.001 |
Fe |
0.020 |
0.002 |
Sn |
0.002 |
<0.001 |
NON-METALLIC IMPURITIES (WT%) |
Type |
Carbon |
Oxygen (Loss on Reduction) |
C40 |
<0.008 |
<0.070 |
C60 |
<0.008 |
<0.070 |
C80 |
<0.008 |
<0.070 |
TUNGSTEN (WT%) > 99.8% Excluding Gases |
|
|
 |
|
|
ANALYTICAL REPORTS
A Certificate of Analysis (COA) accompanies each shipment of tungsten carbide powder. BTI’s own Powder Metallurgy QC Laboratory prepares each COA to include the following:
- Average Particle Size (Fisher Sub-Sieve ASTM B-330)
- Apparent Density (Scott Volumeter ASTM B-329) ]
- Particle Size Distribution (Photelometer ASTM B-430, Sedigraph, or Malvern Mastersizer)
- Chemical Impurity Analysis
|
Packing:In iron drums lined with double plastic bags of 50 or
100 kgs net each.
Note:Any particular requirements to the products can be
discussed.
If you have any interest in our products, please feel free to contact us by email: sales@chinatungsten.com or by telephone:
+86 592 5129696.
|
